Search

Personal menu

Filters

Industrial Valves

Sluice Valves
Safety Valves
Penstock Valves
Globe Valves
Needle Valves
Butterfly Valves
Victaulic Grooved Valves
Knife Valves
Disc Valves
3 Way Valves

Picture for category Industrial Vales

Industrial Vales

View as

Sort by

Display per page

Picture of Globe Valves

Globe Valves

Call for pricing

Bellow globe valve – Flanged ends DIN PN 16 Body and bonnet made of carbon steel GS-C25 (WCB). Bellow material: stainless steel 304. Gasket and packing: graphite. Seal material: stainless steel. Max. working temperature 350ºC. Size ½” to 8”

Picture of Safety Valves

Safety Valves

Call for pricing

BSP threaded ends acc./ ISO 228/1 M-F, available with NPT threaded (2252N). Design, calculations and control according to EN 12516 and EN 4216-1/7. Construction: Stainless steel 1.4408 (CF8M). Seat and disc in stainless steel AISI 316. Set pressure between 0,5 barg and 40 barg. Max. working pressure 40 bar. Working temperature -20ºC +300ºC. Applications: Gas or steam

Picture of Penstock Valves

Penstock Valves

Call for pricing

Penstock for clean liquids or loaded with solids. Design of square or rectangular penstock. Possibility of unidirectional or bidirectional. Various seal materials available. Common design to embed in the walls of the channel. This channel penstock is designed to work in open channels, and has a 3‐side seal (base and sides). It is suitable to work with clean liquids or loaded with solids. Sizes From 150 x 150 up to 3000 x 3000

Picture of Butterfly Valves

Butterfly Valves

Call for pricing

Body: cast iron + epoxy. Disk: zinc plated. Elastomer: EPDM. O’ring stem: NBR. Max. temp. 120ºC. Flanges mounted actuators ISO 5211 handle up to 10” with gear operator from 12”. -4ºF + 248ºF From 2” to 20”

Picture of Victaulic Grooved Valves

Victaulic Grooved Valves

Call for pricing

With handle up to 8" and with gear operator from 10". Body made of ductile iron GGG.40. Disc: D.I + EPDM. Design according to API 609. Grooved standard AWWA C606. Face to face according to MSS SP-67. Working pressure 300 PSI. Working temperature: 0ºC +80ºC. From 2” to 12”

Picture of Knife Valves

Knife Valves

Call for pricing

Wafer design valve. One piece cast body with guides to support gate and seat wedges. Provides high flow rates with low pressure drop and include various seat and packing materials available. This knife gate valve is suitable for liquids that contain a maximum of 5% suspended solids. Standard manufacturing sizes: From DN50 up to DN1200

Picture of Disc Valves

Disc Valves

Call for pricing

Wafer type. Double disk check valve PN 25 Const: AISI 316. Bearings: PTFE. Mounting between flanges PN 25- ANSI 150 Seat: Viton vulcanised in the slot. Sizes DN50 – DN300

Picture of 3 Way Valves

3 Way Valves

Call for pricing

Type “L” 3 way ball valve PN 25. Chrome plated brass UNE-EN 12165 body. 4 PTFE seats. Gas threaded ends (BSP) F - ISO 228/1. Spherical seal 2/3 way type “L”. Max. Temp. 120ºC. Manual control lever. Size 1 ¼” to 2”